U tube evacuated collector

1.high efficiency than heat pipe. 2.it is pressure system. 3.ten years manufacture experience. 4.CE certificated.

CharacteristicsThe U type solar collector are always connected with existing heating supply device. The selective coating of the evacuated tube converts solar energy into heat energy and transfers heat to metal U tube by the aluminum fin.The liquid (usually glycol-water antifreeze mixture) in the metal U tube is heater, and conducts the heat energy to the water inside the storage tank through plate exchanger or internal spiral coiler.

Technical ParametersManifold(interior)  red copperManifold(exterior)  aluminum alloyU Pipe  diameter 8mm thickness/ 0.6mm /red copperAluminium fin  1600 mm full lengthHeat insulation layer  Eco-friendly rockwool 50mmVacuum tube   58*1800mmSS-CU-AIN/ALN coatingBracket  Aluminum alloy 1800mm0-50 degreeHail resistance  25mmMax pressure  6 barAnti-freezing   > -35 °C  Daily efficiency   ≥55%

Parameter Table-1

Type	Area(M2)	Vacuum tube Qty(pcs)	Length/Width/Height(mm)	Gross      Weight           (KG)	20GP/40GP/40HQ  Loading Qty(sets)
Shouting-U01-10	1.280	10	2020*995*155	43	195/395/485
Shouting-U01-15	1.939	15	2020*1410*155	62	120/245/191
Shouting-U01-20	2.595	20	2020*1825*155	70	92/187/222
Shouting-U01-25	3.251	25	2020*2240*155	87	80/163/193
Shouting-U01-30	3.907	30	2020*2655*155	105	65/130/161
Vacuum tube size: 58*1800mm

Remark

Manifold Connections(inch):3/4Max.service temperature: 95°CMax.stagnation temperature:200.3°CFlow range recommendation(50-150L/m2h)

U tube evacuated collector